Variasi Tegangan Pompa Terhadap Kinerja Mesin Sepeda Motor Honda Scoopy

Arief Muliawan, Muhammad Derian Alfaraldi Ramadhan, Yano Hurung Anoi

Abstract


In this study, the effect of pump voltage on engine performance and fuel consumption on the Honda Scoopy motorbike was investigated. The voltage value is between 5 volts and 7 volts for the fuel pump pump pressure. Based on the results of the influence of variations in the voltage electrical fuel pump on engine performance on Honda Scoopy motorcycles by looking for some data, namely; Voltage supplied to the fuel pump, engine RPM, and fuel consumption. From some of the data above, results with the following values are obtained; The voltage values used are 5.80 V, 6.54 V, 7.34 V, 6.68 V, and 7.10 V. The RPM values obtained are 1200, 2607, 3289, 2802 and 3210. The pressure values at the fuel pump obtained are 20 Psi, 21.5 Psi, 27.5 Psi, 22.5 Psi and 25 Psi with an average fuel consumption value of 12 ml/minute for all variables. The results of the study show that the pressure on the fuel is affected by the voltage which affects the engine rpm. Furthermore, the voltage does not affect the value of fuel consumption on the machine.


References


W. W. Pulkrabek, Engineering fundamentals of the internal combustion engine. New Jersey, 2004.

W. Supriyadi and A. Priyo Heru, “Pengaruh Penggunaan Enviropurge KIT Terhadap Performa Mesin Sepeda Motor 4 Langkah,” Jurnal Teknik Mesin, vol. 1, no. 2, pp. 171–176, 2013.

A. Nur and W. B. Santoso, “Analisa Laju Pelepasan Panas Terhadap Perubahan Tekanan Injeksi Bahan Bakar Motor Diesel,” in prosiding Seminar Nasional Teknoin, 2008, pp. 19–24.

I. W. S. Wibawa, I. G. B. W. Kusuma, and I. N. Budiarsa, “Uji Variasi Tekanan Nosel Terhadap Karakteristik Semprotan Bahan Bakar Biodiesel,” Jurnal METTEK, vol. 1, no. 2, pp. 35–44, 2015.

T. C. Bani, E. Sutrisno, and S. Sumiyati, “Studi Pengaruh Jarak Tempuh Dan Umur Mesin Kendaraan Bermotor Roda Empatterhadap Konsentrasi Emisi Karbon Monoksida (CO) Dan Nitrogen Oksida (NOx)(Studi Kasus: Toyota Avanza Berbahan Bakar Premium),” Jurnal Teknik Lingkungan, vol. 2, no. 4, pp. 1–7, 2013.

A. Aryadi, “Kajian Eksperimental Pengaruh Variasi Tekanan Electric Fuel pump Terhadap Daya, Torsi Mesin, Emisi Gas Buang Dan Konsumsi Bahan Bakar Sepeda Motor Injeksi,” Teknobiz: Jurnal Ilmiah Program Studi Magister Teknik Mesin, vol. 10, no. 3, pp. 55–60, 2020.

P. Setyadi and H. Ghany Setyawan, “Pengaruh Kenaikan Tekanan Pompa Bahan Bakar Terhadap Performa Sepeda Motor Honda 125 CC Injeksi Menggunakan Pompa Bahan Bakar Pneumatik,” in Prosiding Semnastek, 2017, pp. 1–6.

I. I. Salim and F. D. Suprianto, “Percobaan Dual Fuel Injection System Pada Motor Bakar Bensin,” Mechanova, vol. 6, pp. 1–4, 2017.

A. Budiprasojo and A. Irawan, “Engine combustion efficiency and performance of exhaust pipe fuel preheating system,” Jurnal Rekayasa Mesin, vol. 9, no. 1, pp. 1–7, 2018.

S. Ghozi, “Penggunaan Aplikasi GeoGebra dalam Pembelajaran dan Penyelesaian Persoalan Statistik,” in Industrial Research Workshop and National Seminar, 2015, pp. 15–22.

J. J. Siang, Riset Operasi dalam Pendekatan Algoritmis. Yogyakarta: ANDI OFFSET, 2011.




DOI: https://doi.org/10.32487/jst.v8i2.1669

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 JST (Jurnal Sains Terapan)

View My Stats