Analisa Perawatan Berbasis Keandalan pada Sistem Bahan Bakar Mesin Utama KMP. Bontoharu

Risna Imanuell, Mohammad Lutfi

Abstract


This study determines the prone components and the mean time to failure of KMP. Bontoharu. The method used in this research is the qualitative analysis, which comprises the failure mode, effect, analysis (FMECA), fault tree analysis (FTA), and quantitative analysis using Weibull distribution to determine the mean time to failure (MTTF) value. The risk method based inspection and maintenance is used to determine the value of equipment risk and maintenance scheduling model, and the inspection method used is visual check. The results revealed that the value of MTTF filter was 194 hours, separator was 502 hours, and pipe was 2508 hours. Filters and separators have the highest level of risk, while the mainframe, daily trays, transfer pumps, feed pumps, injection pumps, and injector service tanks have medium risk levels. 

 

Keywords: fuel system, Reliability, FMECA, FTA, Maintenance


References


E. S. Hadi, dan U. Budiarto. Analisa Keandalan Sistem Bahan Bakar Motor Induk pada KM. Leuser. Kapal, vol. 5, no. 2, pp. 123-135, 2008

D. Kececioglu. Realiability Engineering Handbook , vol. 2, DEStech Publications, inc, Lancaster, Pennsylvania 17601, U.S.A, 2002.

Alwi, R. Reliability Centered Maintenance dalam Perawatan FO Service Pump Sistem Bahan Bakar Kapal Ikan. Jurnal Riset Teknologi Kelautan, vol. 14, no. 1, 2016.

R. Ramakumar., Engineering Reliability Fundamental and Applications, Prentice-Hall Inc, Oklahoma State University Stillwater, Oklahoma, 1993.

A. K. Buda. Pendahuluan Kuliah Kehandalan SIstem, Handout Kuliah Kehandalan Sistem, Jurusan Teknik Sistem Perkapalan, ITS, 2005.

Putra, Muhammad Nur Mulianto, Ishardita Pambudi Tama, and Zefry Darmawan. "Analisis Penyebab Defect Kapal Motor (Km) Pagerungan Pada Bagian Hull Construction (Hc) Dengan Metode Failure Mode and Effect (Fmea) Dan Fault Tree Analysis (Fta)(Studi Kasus Di PT. Pal Indonesia)." Jurnal Rekayasa dan Manajemen Sistem Industri 3.2 (2015): p291-300.

Sholihin, Yudi M. "Optimalisasi Sistem Perawatan dan Perbaikan Terencana Berdasarkan Analisis Keandalan Pada Mesin Diesel Penggerak Generator C18." TEKNOBIZ: Jurnal Ilmiah Program Studi Magister Teknik Mesin 6.1 (2016): 39-43

Hadi, Eko Sasmito, and Parlindungan Manik. "ANALISA KEANDALAN TERHADAP LIFETIME SYSTEM PENDINGIN KAPAL IKAN KM. RUKUN ARTA SENTOSA 06 MENGGUNAKAN REFRIGERAN CO2 DAN KOMPRESI BANTU DARI ENERGI PANAS." Kapal 5.1 (2012): 52-59

Manalu, Relinton B., Untung Budiarto, and Hartono Yudo. "ANALISA PERAWATAN SISTEM DISTRIBUSI MINYAK LUMAS BERBASIS KEANDALAN PADA KAPAL KM. BUKIT SIGUNTANG DENGAN PENDEKATAN RCM (RELIABILITY CENTERED MAINTENANCE)." Jurnal Teknik Perkapalan 4.1 (2016).




DOI: https://doi.org/10.32487/jst.v5i1.540

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 JST (Jurnal Sains Terapan)

View My Stats