Rancang Bangun Solar Tracker Single Axis Dengan Motor Power Window DC CSD60-B

Fakhri Al-Akhyar Putra Bumi, Erwan Eko Prasetiyo, Gaguk Marausna

Abstract


Solar power plants are one of the results of the development of energy source processing technology by utilizing solar energy converted into electrical energy using solar panels. The research objective is to obtain a conceptual design that is effective on a single axis solar tracker, so that it can absorb sunlight optimally. single axis solar tracker motor drive capable of detecting light sources. The research method using the development method (Research and Development) is a research method used to produce certain products by assessing the effectiveness of the products produced. The results of the research on single axis design using the generated DC CSD60-B power window; 3 (three) variants of the single axis solar tracker design concept, namely the horizontal axis force concept, the leg component concept, the moment force or torque concept with a capacity of 2 pv 100 wp units. Specifications for the size of the upper frame structure: length 150 -160 cm, width 100 – 110 cm and thickness 4-5 cm, the components of the legs have a length of 1400 – 1600 mm, a width of 900 -1100 mm, and the upper support shaft has a geometric diameter of 57 – 60 mm, length 1500 – 1700 mm thick 2 – 5 mm consists of spur gear timing belt v, moving up to 80˚, using a single drive motor. The total electrical energy produced by the single axis solar tracker every 30 minutes is 43.06 Watts and 8 hours of testing (08.00-16.00 WIB) = 750.44 Watts.

Keywords


Solar power plants, solar tracker ,sistem tracker, power window.

Full Text:

PDF

References


K. W. Fauzi, T. Arfianto, And N. Taryana, “Perancangan Dan Realisasi Solar Tracking System Untuk Peningkatan Efisiensi Panel Surya Menggunakan Arduino Uno,” Telka - Telekomun. Elektron. Komputasi Dan Kontrol, Vol. 4, No. 1, Pp. 63–74, 2018, Doi: 10.15575/Telka.V4n1.63-74.

A. S. Syahab, H. C. Romadhon, And M. L. Hakim, “Rancang Bangun Solar Tracker Otomatis Pada Pengisian Energi Panel Surya Bebasis Internet Of Things,” J. Meteorol. Klimatologi Dan Geofis., Vol. 6, No. 2, Pp. 21–29, 2019, Doi: 10.36754/Jmkg.V6i2.120.

I. Kasim And R. Muhammad Pangestu, “Rancang Bangun Reflektor Surya Untuk Meningkatkan Efisiensi Pada Sistem Pembangkit Listrik Tenaga Surya 60 Watt,” Pp. 194–200, 2017, Doi: 10.21063/Pimimd4.2017.194-200.

M. H. Prayogo, “Implementasi Sistem Kontrol Dan Proteksi Pembangkit Photovoltaic Skala Kecil,” Semin. Has. Elektro S1 Itn Malang, 2019.

R. Putri, S. Meliala, And Z. Zuraida, “Penerapan Instalasi Panel Surya Off Grid Menuju Energi Mandiri Di Yayasan Pendidikan Islam Dayah Miftahul Jannah,” Jet (Journal Electr. …, Vol. 5, No. 3, Pp. 117–120, 2020, [Online]. Available: Https://Jurnal.Uisu.Ac.Id/Index.Php/Jet/Article/View/3546.

A. W. Hasanah, T. Koerniawan, And Y. Yuliansyah, “Kajian Kualitas Daya Listrik Plts Sistem Off-Grid Di Stt-Pln,” Energi & Kelistrikan, Vol. 10, No. 2, Pp. 93–101, 2019, Doi: 10.33322/Energi.V10i2.211.

C. Pradita, “Perancangan Maximum Power Point Tracking (Mppt) Pada Passive Two Axis Solar Tracker Berbasis Ant Colony Optimization,” Institut Teknologi Sepuluh Nopember Surabaya, 2018.

M. Ali, M. R. Djalal, M. Fakhrurozi, Kadaryono, Budiman, And D. Ajiatmo, “Optimal Design Capacitive Energy Storage (Ces) For Load Frequency Control In Micro Hydro Power Plant Using Flower Pollination Algorithm,” 2018 Electr. Power, Electron. Commun. Control. Informatics Semin. Eeccis 2018, Pp. 21–26, 2018, Doi: 10.1109/Eeccis.2018.8692997.

V. Firmansyah, “Rancang Bangun Alat Pembelah Durian Menggunakan Motor Power Window,” Politeknik Negeri Padang, 2017.

D. Suryana, “Otomatisasi Pada Panel Surya Menggunakan Sistem Tracking Aktif Tipe Single-Axis Automation Single Axis Type Of Active System Tracking On,” Vol. 2, No. 1, 2016.

A. B. Pulungan, Q. Fajri, And I. Yelfianhar, “Peningkatan Daya Keluaran Panel Surya Menggunakan Single Axis Tracker Pada Daerah Khatulistiwa,” Jurnal, T. Elektro,Vol. 7, No. 2, Pp. 261–270, 2021.

C. J. C. Simalango, “Desain Prototipe Single Axis Solar Tracker Untuk Peningkatan Kinerja Pembangkit Listrik Tenaga Surya Fotovoltaic 100 Wp,” 2021, Doi: 10.1038/132817a0.

A. Soegihin Et Al., “Rancang Bangun Rangka Sun Tracking Pada Panel Surya Dinamik,” Jom Fteknik, Vol. 8, No. 1, Pp. 1–7, 2021.

H. Zuddin And S. I. Haryudo, “Perancangan Dan Implementsi Sistem Instalasi Solar Tracking Dual Axis Untuk Optimasi Panel Surya,” J. Tek. Elektro, Univ. Negeri Surabaya, Vol. 8, No. 3, Pp. 563–570, 2019.

O. Kurdi, D. Satrijo, T. Prahasto, R. Ismail, And D. Yusuf, “Perancangan Foldable Wall-Mounted Workbench Untuk Memudahkan Pekerjaan Tukang Kayu,” Vol. 23, No. 2, Pp. 29–35, 2021.

C. Wiratama, Pesawat Terbang. 2016.

A. N. Hidayanti, P. Handayani, And I. C. J. R, “Pemanfaatan Metode Single Axis Tracker Dan Maximum Power Point Tracker ( Mppt ) Pid Untuk Mengoptimalkan Daya Keluaran Panel Surya,” Vol. 1, Pp. 149–155, 2019.

B. M. Rizky, “Penggunaan Arduino Uno Sebagai Alat Tracker Matahari Pada Plts 200 Wp Dengan Sistem Solar Charge,” P. 66, 2020.

J. Nazaruddin,Nazaruddin;Jefriadi, “Rancang Bangun Rangka Pencetak Bakso Dengan Kapasitas 250 Butir/Menit,” J. Online Mhs. Fak. Tek. Univ. Riau, Vol. 6, Pp. 2–7, 2019, [Online]. Available: Https://Jom.Unri.Ac.Id/Index.Php/Jomfteknik/Article/View/24553/23778.

K.-H. G. Gerhard Pahl, W. Beitz, Jörg Feldhusen, Engineering Design A Systematic Approach., 3rd Englis. London: Springer, 2007.




DOI: https://doi.org/10.32487/jtt.v10i1.1420

Refbacks

  • There are currently no refbacks.


JTT (Jurnal Teknologi Terpadu) has been indexed by:

 

 

 

 

 

 

 

 

 

Web Analytics

JTT Visitor Stats