Rancang Bangun Battery Monitoring System (BMS) berbasis LabVIEW

Ihsan Ihsan, angga wahyu aditya

Abstract


Percepatan pengembangan kendaraan listrik di Indonesia telah tertuang di dalam peraturan presiden (Perpres) nomor 55 tahun 2019. Percepatan pengembangan kendaraan listrik ini dilatarbelakangi oleh cadangan bahan bakar minyak yang terus menurun dan bahaya pencemaran lingkungan. Selain itu, pengembangan konsep kendaraan Low-Cost Green Car (LCGC) menjadi fokus penelitian di beberapa negara untuk memerangi pencemaran lingkungan. Pengembangan teknologi komponen penyusun battery, battery monitoring system (BMS) menopang sekitar 60% keberhasilan pengembangan kendaraan listrik. BMS dirancang untuk mengakomodasi kebutuhan mengenai monitoring tegangan, arus dan temperature battery. Sensor tegangan pada BMS didesain menggunakan prinsip pembagi tegangan dengan mempertimbangkan tegangan kerja analog to digital converter (ADC) microcontroller. Penggunaan sensor arus ACS758 mempertimbangkan kebutuhan arus maksimal dari motor listrik yang digunakan. Sedangkan sensor temperature menggunakan PT100. Komunikasi serial digunakan untuk mengirimkan data dari microcontroller ke LabVIEW dengan protokol pengiriman data berupa data pembacaan tegangan, arus dan temperatur sebesar dua digit. Protokol pengiriman data dari microcontroller dicacah pada program block diagram LabVIEW dan ditampilkan pada front panel dalam bentuk grafik.


Keywords


kendaraan listrik, BMS, LabVIEW, microcontroller

Full Text:

PDF

References


C. Maini, K. Gopal and R. Prakash, "Making of an ‘all reason’ electric Vehicle," in International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, Barcelona, 2013.

BPPT, Indonesia Energy Outlook - Dampak Peningkatan Pemanfaatan Energi Baru Terbarukan Terhadap Perekonomian Nasional, Jakarta: Pusat Pengkajian Industri dan Proses Energi (PPIPE) - Badan Pengkajian dan Penerapan Teknolog (BPPT), 2019.

S. M. Fard, A. Khajepour, A. Goodarzi and E. Esmailzadeh, "Design and control of a narrow electric vehicle," in International Electric Vehicle Conference, Greenville, 2012.

M. YAICH, M. R. HACHICHA and M. GHARIANI, "Modeling and Simulation of Electric and Hybrid Vehicles for Recreational Vehicle," in International conference on Sciences and Techniques of Automatic control & computer engineering - STA, Monastir, 2015.

A. Saleki, S. Rezazade and M. Changizian, "Analysis and Simulation of Hybrid Electric Vehicles for Sedan Vehicle," in Iranian Conference on Electrical Engineering, Tehran, 2017.

A. Sriwilai, W. Pattaraprakorn, V. Chutiprapat, C. Sansilah and P. Bhasaputra, "The Study on the Effect of Electric Car to Energy Consumption in Thailand," in 13th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON), Chiang Mai, 2016.

W. Chen, J. Liang, Z. Yang and G. Li, "A Review of Lithium-Ion Battery for Electric Vehicle Applications and Beyond," in International Conference on Applied Energy (ICAE2018), Hong Kong, 2018.

C. Iclodean, B. Varga, N. Burnete, D. Cimerdean and B. Jurchiș, "Comparison of Different Battery Types for Electric Vehicles," in IOP Conference Series: Materials Science and Engineering, Pitesti, 2017.

M. Brandl, H. Gall, M. Wenger, V. Lorentz, M.Giegerich, F. Baronti, G. Fantechi, L. Fanucci, R. Roncella, R. Saletti, S. Saponara, A. Thaler, M. Cifrain and W. Proschazka, "Batteries and Battery Management Systems for Electric Vehicles," in 2012 Design, Automation & Test in Europe Conference & Exhibition (DATE), Dresden, 2012.

X. Jun and L. Zhou, "Lithium battery remote monitoring system for vehicle mounted," in 2017 29th Chinese Control And Decision Conference (CCDC), Chongqing, 2017.

W. Menghua and X. Bing, "A Real-Time Android-Based Monitoring System for the Power Lithium-Ion Battery Used on EVs," in 2017 10th International Conference on Intelligent Computation Technology and Automation (ICICTA), Changsa, 2017.

P. Sinclair, R. Duke and S. Round, "An adaptive battery monitoring system for an electric vehicle," in 1998 International Conference on Power Electronic Drives and Energy Systems for Industrial Growth, Perth, 1998.

S. A. Mathew, R. Prakash and P. C. John, "A smart wireless battery monitoring system for Electric Vehicles," in 12th International Conference on Intelligent Systems Design and Applications (ISDA), Kochi, 2012.

F. A. Shah, S. S. Sheikh, U. I. Mir and S. O. Athar, "Battery Health Monitoring for Commercialized Electric Vehicle Batteries: Lithium-Ion," in 5th International Conference on Power Generation Systems and Renewable Energy Technologies (PGSRET), Istanbul, Turkey, 2019.

Y. Xing, E. W. M. Ma, K. L. Tsui and M. Pecht, "Battery management systems in electric and hybrid vehicles," Energies, vol. 4, no. 11, pp. 1840 - 1857, 2011.

K. M. Tsang and W. L. Chan, "State of health detection for Lithium ion batteries in photovoltaic system," Energy Conversion and Management, vol. 65, pp. 7-12, 2013.

M. Ouyang, X. Feng, X. Han, L. Lu, Z. Li and X. He, "A dynamic capacity degradation model and its applications considering varying load for a large format Li-ion battery," Applied Energy, vol. 165, pp. 48-59, 2016.

S. Thein and Y. S. Chang, "Decision making model for lifecycle assessment of lithium-ion battery for electric vehicle--A case study for smart electric bus project in Korea," Journal of Power Sources, vol. 249, pp. 142 - 147, 2014.

Z. He, M. Gao, G. Ma, Y. Liu and S. Chen, "Online state-of-health estimation of lithium-ion batteries using Dynamic Bayesian Networks," Journal of Power Sources, vol. 267, pp. 576 - 583, 2014.

S. Wardoyo, R. Munarto and V. P. Putra, "Rancang Bangun Data Logger Suhu Menggunakan Labview," JURNAL ILMIAH ELITE ELEKTRO, vol. 4, no. 1, pp. 23 - 30 , 2013.

S. Venkatlakshmi, S. Vivekanandhan, S.Revathi, E. Arul and C.Paramasivam, "Industrial Process Management using LabVIEW," IOSR Journal of Electronics and Communication Engineering (IOSR-JECE), vol. 5, no. 6, pp. 46-56, 2013.

O. P. Singh, D. Mekonnen and M. B. Malarvili, "Labview Based ECG Patient Monitoring System for Cardiovascular Patient Using SMTP Technology," Journal of Medical Engineering, pp. 1-9, 2015.

H. H. FAKHRUDDIN, H. TOAR, E. PURWANTO, H. OKTAVIANTO, R. A. N. APRIYANTO and A. W. ADITYA, "Kendali Kecepatan Motor Induksi 3 Fase Berbasis Particle Swarm Optimization (PSO)," ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika, vol. 8, no. 3, pp. 477-491, 2020.

A. S. Ashtekar, B. J.Parvat and C. B. Kadu, "Application of MODBUS to Communicate the PLC and Lab VIEW for Real Time Process Control," International Journal of Emerging Science and Engineering (IJESE), vol. 1, no. 11, pp. 41 - 45, 2013.

S. B, D. S. K, Dr.D.Sharmila, B. R. B, M. S. K and VEDIK, "SCADA Application Development Using LabVIEW," International Journal of Engineering and Innovative Technology (IJEIT), vol. 3, no. 2, pp. 407 - 410, 2013.

D. N. G, S. R. P, V. A, C. K and A. Tanzeel, "Low-Cost Data Acquisition System with LabVIEW GUI for Real-Time Flight Data Transmission in UAVs," International Journal of Engineering Research & Technology (IJERT), vol. 9, no. 3, pp. 574-579, 2020.

H. S. Hasan, M. Hussein, S. M. Saad and M. A. M. Dzahir, "Graphical User Interface (GUI) for Local Positioning System Based on Labview," nternational Journal of Machine Learning and Computing, vol. 9, no. 2, pp. 236 - 241, 2019.

F. Adamo, F. Attivissimo, G. Cavone and N. Giaquinto, "SCADA/HMI Systems in Advanced Educational Courses," IEEE Transactions on Instrumentation and Measurement, vol. 56, no. 1, pp. 4-10, 2007.




DOI: https://doi.org/10.32487/jtt.v9i1.972

Refbacks

  • There are currently no refbacks.


JTT (Jurnal Teknologi Terpadu) has been indexed by:

 

 

Web
Analytics

JTT Visitor Stats