Perencanaan Volume Injeksi CO2 Dan Tekanan Injeksi CO2 Dengan Pola Injeksi ¼ Dari 5 Spot Pada Kegiatan CO2 Flooding-Enhanced Oil Recovery (CO2EOR) Di Sumur "TRK-15" Lapangan "KLMT"
DOI:
https://doi.org/10.32487/jst.v9i1.1740Abstract
The "TRK-15" well in the “KLMT” field is classified as an old well located in Jambi Province. This study focuses on calculating CO2 injection volume and CO2 injection pressure using 4 injection rate parameters by applying the CO2 flooding design method. The research method used is the CO2 flooding-enhanced oil recovery method. CO2 flooding design calculations focus on the amount of CO2 injected and CO2 injection pressure with 4 injection rate parameters (qi) starting from 5 Mscfd, 10 Mscfd, 15 Mscfd, 20 Mscfd. Based on the research results based on 4 injection rate parameters (qi), for an injection rate (qi) of 5 Mscfd, the CO2 front time (tCO2) = 50.03 hours and the amount of CO2 needed for injection (VCO2) = 3,481,790.4 scf. For the injection rate parameter (qi) of 10 Mscfd, the CO2 front time (tCO2) = 25.01 hours and the amount of CO2 required for injection (VCO2) = 1,742,136.48 scf. For the injection rate parameter (qi) 15 Mscfd, the CO2 front time (tCO2) = 16.67 hours and the amount of CO2 required for injection (VCO2) = 1,162,458.72 scf. For the injection rate parameter (qi) 20 Mscfd, the CO2 front time (tCO2) = 12.51 hours and the amount of CO2 required for injection (VCO2) = 871,999.2 scf. For the injection rate parameter (qi) 5 Mscfd, CO2 tubing injection pressure (Ptf) = 227.95 psi, for the injection rate parameter (qi) 10 Mscfd obtained (Ptf) = 903.43 psi, for the injection rate parameter (qi) 15 Mscfd obtained (Ptf) = 2,025.51 psi, for the injection rate parameter (qi) 20 Mscfd obtained (Ptf) = 3,594.03 psi. Keywords : CO2 Flooding, Enhanced Oil Recovery, Production Flow Rate
Downloads
Published
Issue
Section
License
Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Jurnal Sains Terapan, campus polytechnic country balikpapan, Balikpapan, East Kalimantan as publisher of this journal.
Copyright encompasses exclusive rights to reproduce and deliver the article in all forms and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations. The reproduction of any part of this journal, its storage in databases and its transmission by any forms or media, such as electronic, electrostatic and mechanical copies, photocopies, recordings, magnetic media, etc., will be allowed only with a written permission from Jurnal Sains Terapan, Campus Polytechnic Country Balikpapan, Balikpapan, East Kalimantan.
Jurnal Sains Terapan, campus polytechnic country Balikpapan, Balikpapan, East Kalimantan, Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in Jurnal Sains Terapan are the sole and exclusive responsibility of their respective authors and advertisers.
The Copyright Transfer Agreement Form can be downloaded from this link The copyright form should be filled with respect to article and be signed originally and sent scanned document file (softcopy) and the article to our email, jst@poltekba.ac.id or sent it to the Editorial Office in the form of original hard copy and the article in softcopy form on Flash Disc or Compact Disc, to;
Saiful Ghozi as JST Journal Manager, Pusat Penelitian dan Pengabdian Kepada Masyarakat, Politeknik Negeri Balikpapan, Jl.Soekarno Hatta Km.8, Balikpapan, East Kalimantan.
