Pengaruh Variasi Ketebalan Square Tube Din 10305-5 Terhadap Defleksi Rangka Plastic Shredder
DOI:
https://doi.org/10.32487/jst.v10i1.1999Abstract
shredder used square mild steel tubes 30 mm x 30 mm with 3 mm thickness close to DIN 10305-5 standard specification for square tubes in Indonesia. This 3 mm thickness square tube was rare in Indonesia because most hardware shops only sell variants with a maximum thickness of 2 mm. The effect of tube thickness variation on frame deflection is the primary concern in this research. The frame analysis method is used to calculate maximum deflection on the frame. The square tube thickness value varied from 3 mm, 2 mm, and 1mm. As the results obtained, it was found that the maximum deflection occurred in the tube which has a thickness of 1 mm by 0.065 mm. While on a tube that has a thickness of 3 mm, the maximum deflection is 0.031 mm. And in order to maintain the value of maximum deflection less than or equal to 0.031 mm, minor modifications were applied to the frame design. The new frame design using square tubes thickness of 1 mm has a maximum deflection value of 0.029 mm, which is slightly better than the original designReferences
“SIPSN - Sistem Informasi Pengelolaan Sampah Nasional,” 2020. http://sipsn.menlhk.go.id/sipsn/ (accessed Apr. 18, 2021).
“Precious plastic - Dave Hakkens.” https://davehakkens.nl/projects/precious-plastic/ (accessed Apr. 15, 2021).
R. C. Hibbeler, Engineering Mechanic Statics, 13th Edition. 2013.pp.85-89
R. C. Hibbeler, Mechanics of Materials 8th Edition. 2011.
E.P.Popov, Mechanocs of Materials 2nd Edition,2002 .
B.J.Masurek, Vector Mechanics of Engineers 10th Edition,”
J.L.Mariam, Statics, 7th Edition. 2006.
R.G.Budynas, Shigley's Mechanical Engineering Design 10th Edition. 2014.
M.F.Asbhy,Materials Selection in Mechanical design 3rd Edition. 2005
Downloads
Published
Issue
Section
License
Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Jurnal Sains Terapan, campus polytechnic country balikpapan, Balikpapan, East Kalimantan as publisher of this journal.
Copyright encompasses exclusive rights to reproduce and deliver the article in all forms and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations. The reproduction of any part of this journal, its storage in databases and its transmission by any forms or media, such as electronic, electrostatic and mechanical copies, photocopies, recordings, magnetic media, etc., will be allowed only with a written permission from Jurnal Sains Terapan, Campus Polytechnic Country Balikpapan, Balikpapan, East Kalimantan.
Jurnal Sains Terapan, campus polytechnic country Balikpapan, Balikpapan, East Kalimantan, Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in Jurnal Sains Terapan are the sole and exclusive responsibility of their respective authors and advertisers.
The Copyright Transfer Agreement Form can be downloaded from this link The copyright form should be filled with respect to article and be signed originally and sent scanned document file (softcopy) and the article to our email, jst@poltekba.ac.id or sent it to the Editorial Office in the form of original hard copy and the article in softcopy form on Flash Disc or Compact Disc, to;
Saiful Ghozi as JST Journal Manager, Pusat Penelitian dan Pengabdian Kepada Masyarakat, Politeknik Negeri Balikpapan, Jl.Soekarno Hatta Km.8, Balikpapan, East Kalimantan.
