Desain dan Perancangan Internet of Things Sebagai Sistem Kontrol Cerdas Motor 1 Phase

Ihsan Ihsan, Armin Armin, Armin Armin

Abstract


Developments in the field of technology are growing rapidly and have become one of the necessities of human life. The use of technology that is often used is only general but is not utilized better. The technology in question is planning and designing an intelligent Internet of Things (IoT) system for single-phase induction motors, namely electric machines that run according to the magnetic field induction from the rotor coil. This motor is most widely used by the public, especially in household equipment and some in industry, such as blowers, water pumps and others. In this research, the method that will be used is a prototype design method starting from literature study, model design planning, and an Internet of Things-based control and monitoring system. The results of this research will be in the form of a prototype, design and design of an intelligent control and monitoring system using IoT using Google Assistant. Creating commands on Relays that are associated with feeds on Adafruit IO is done before commands on IFTTT (If This, Then That). If Google Assistant fails to recognize the command made and the information associated with IFTTT, it will respond with a voice that cannot process the command.


References


Hanani, A., & Hariyadi, M. A. (2020). Smart home berbasis IOT Menggunakan Suara Pada Google assistant. Jurnal Ilmiah Teknologi Informasi Asia, 14(1), 49. https://doi.org/10.32815/jitika.v14i1.456

Rahman, M. A., & Raharjo, M. A. (2024). Rancang Bangun alat peraga sistem kontrol berbasis MIKROKONTROLLER IOT Dengan Aplikasi smartphone. JPB : Jurnal Patria Bahari, 3(2). https://doi.org/10.54017/jpb.v3i2.103

Huang, J.-T., Chang, L.-Y., & Lin, H.-C. (2021). Implementation of IOT, Wearable Devices, google assistant and google cloud platform for elderly home care system. Proceedings of the 7th International Conference on Information and Communication Technologies for Ageing Well and E-Health. https://doi.org/10.5220/0010473102030212

Nurafliyan Susanti, E., Hakim, Z., & Rizky, R. (2021). Rumah Pintar Dengan Aplikasi google assistant Menggunakan Arduino ESP8266 Berbasis IOT (internet of things). Pelita : Jurnal Penelitian Dan Karya Ilmiah, 21(2), 229–232. https://doi.org/10.33592/pelita.v21i2.1784

Jayusman, Y., Faisal, I., & Zaneal, R. (2020). Erancangan prototype Kendali Lampu Berbasis internet of things (IOT) Dengan Nodemcu ESP8266 Dan voice recognition pada smartphone. Jurnal Teknologi Informasi Dan Komunikasi, 9(1), 15–25. https://doi.org/10.58761/jurtikstmik bandung.v9i1.112.

Ahmad Rizal Nurika. (2022). Analisis Pengaruh suhu TERHADAP tegangan Tidak Seimbang Pada Motor Induksi. Jurnal Sains Dan Teknologi, 1(1), 27–33. https://doi.org/10.58169/saintek.v1i1.33

Adiyoga, A., & Chandra, D. W. (2023). Sistem Kipas Angin Otomatis Dengan Sensor Suhu Dan Sensor ultrasonik berbasis arduino. Jurnal JTIK (Jurnal Teknologi Informasi Dan Komunikasi), 7(1), 114–120. https://doi.org/10.35870/jtik.v7i1.700

Kusumo, B. (2023). Rancang Bangun Pengendali Jarak jauh panel Listrik Rumah Berbasis Mikrokontroler Arduino Uno R3 Menggunakan smartphone android Dengan Komunikasi bluetooth 3.0. JURNAL KRIDATAMA SAINS DAN TEKNOLOGI, 5(02), 448–472. https://doi.org/10.53863/ kst.v5i02.957

Anwar, N., Tjahjono, B., & Tarigan, M. (2020b). Review optimasi energi pada protokol internet of things (studi awal perancangan sistem tracking Kendaraan Berbasis internet of things). JUTEKIN (Jurnal Teknik Informatika), 8(1). https://doi.org/10.51530/jutekin.v8i1.463

Yunus Tjandi, & Zulhajji. (2023). Sistem Kontrol Perangkat Listrik Hemat energi Pada Bangunan Berbasis Berbasis internet of things (IOT). SEMINAR NASIONAL DIES NATALIS 62, 1, 526–534. https://doi.org/10.59562/semnasdies.v1i1.1073

Pela, M. F., & Pramudita, R. (2021). Sistem Monitoring Penggunaan Daya Listrik Berbasis internet of things pada rumah dengan Menggunakan Aplikasi Blynk. Infotech: Journal of Technology Information, 7(1), 47–54. https://doi.org/10.37365/jti.v7i1.106

Kurnia Putra, D., Alfith, A., & Shaliha Rosa, A. (2023). Perancangan Alat monitoring sistem Kerja solar panel BERBASIS IOT (internet of things). Jurnal Teknologi Dan Vokasi, 1(1), 12–20. https://doi.org/10.21063/jtv.2023.1.1.3




DOI: https://doi.org/10.32487/jst.v10i2.2267

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 JST (Jurnal Sains Terapan)

View My Stats