Penerapan Internet of Things Pada Sistem Kendali Pengisian Token Listrik Prabayar
DOI:
https://doi.org/10.32487/jst.v10i2.2298Abstract
Filling in electricity tokens is very important for the continued use of electricity, be it filling up prepaid Kwh electricity tokens so that the need for automatic filling is urgently needed to reduce difficulties in filling in electricity tokens manually. In designing an Internet of Things (IoT) based system that is designed to provide automatic charging control remotely, using the ESP32 microcontroller, ESP32 CAM, and other components, this system can monitor the condition of the electricity meter and send notifications to smartphones when the pulse is nearing exhaustion. Furthermore, with the relay module, the system automatically enters the token code via a push pull solenoid. The test results show that this system can provide notifications with an average time of 41 seconds and sending messages for 43 seconds. ESP32-CAM sends data to a smartphone with a delay in sending messages and photos on Telegram, with the fastest speed of 2 seconds, sending messages for 3 seconds, and sending photos on average 6.2 seconds, from the results obtained that the tool that has been designed can provide increased comfort and efficiency for the user when the user is not at the Kwh of electricity location when the electricity token runs out soon.
Keywords: Internet of Things, Sensor, Relay, Microcontroller
References
H. N. Giarniasih, "Smart Sistem Untuk Pemantauan Dan Pengisian Pulsa Listrik Pra Bayar Via Smartphone," Jurnal Teknologi Elektro, Universitas Mercu Buana, vol. Vol. 10., pp. 97-102, Mei 2019.
D. Kurnianto, A. Wijaya and M. A. Amanaf, "Sistem Pengisian Token Listrik Jarak Jauh Berbasis IoT pada Alat Ukur Listrik Rumah," Jurnal Telekomunikasi, Elektronika, Komputasi, dan Kontrol, pp. 14-23, 2022.
Y. Novriandry, D. Triyanto and S. , "Prototype Sistem Monitoring Dan Pengisian Token Listrik Prabayar Menggunakan Arduino Uno Berbasis Website," Jurnal Komputer dan Aplikasi, pp. 61-72, 2020.
R. Syahputra, N. and A. M. Hara Pardede, "Pemodelan Pengisian Pulsa Listrik Prabayar Berbasis Short Message Service (SMS)," Jurnal Informatika Kaputama, pp. 91-100, 2020.
M. A. Auliq and F. R. Zamroni, "Prototype Alat Pendeteksi Dini Gangguan Fuse Cut Out (FCO) Sistem Kelistrikan PLN Berbasis IoT," Jurnal Teknik Elektro dan Komputasi (ELKOM), p. 97, 2021.
S. Manullang, Robot Pengisi Nomor Token Listrik, Pekanbaru: Pustaka Politeknik Caltex Riau, 2020.
A. K. I. Husnaini and R. Maulana, "Aplikasi IoT Untuk Kendali Beban Listrik," Jurnal Teknik Elektro Indonesia, vol. 1 no 2, pp. 207-2011, 2020.
C. A. Pralingga, E. S. S.T., M.T., PhD. and U. S. S.T., M.T., "Perancangan Simulasi Sistem Pengisian Token Listrik Prabayar Menggunakan Komunikasi Berbasis Layanan Pesan Singkat (LPS)," Telkom Univ, Vols. Vol.2, No. 3,, pp. 7038-7043, 2015.
D. Setiawan, H. Jaya, T. Syahputra and M. S. Syafnur, "Implementasi ESP32-CAM Dan Blynk Pada Wifi Door Lock System Menggunakan Teknik Duplex," Journal Of Science And Social Research, pp. 159-164, 2022.
S. Y. Saragih, P. W. Sirait, P. Waluyo and S. , "Perancangan Sistem Kendali Otomatis Smart Home Berbasis Android Menggunakan Teknologi Wifi (ESP32) Dan Arduino Uno," Jurnal Teknovasi, vol. 09, pp. 57-66, 2022
P. A. A. P. Basabilik, "Rancang Bangun Sistem Pemantau Kedatangan Tamu Berbasis Internet Of Things (IOT)," Prisma Fisika, vol. 9, pp. 110-116, 2021.
A. Wagyana and R. , "Prototipe Modul Praktik untuk Pengembangan Aplikasi Internet of Things (IoT)," Jurnal Ilmiah Setrum, vol. 8, pp. 238-247, 2019.
M. N. Latif, Rancang Bangun Alat Pengunci Pintu Tanpa Sentuh Berbasis Arduino Sebagai Sarana Pencegahan Penularan Virus Corona (COVID-19), cilegon, banten: Jurusan Teknik Mesin,Fakultas Teknik Mesin, Universitas Sultan Ageng Tirtayasa, 2022.
R. Soleman, M. Mirza and A. Sofwan, "Rancang Bangun Prototype Sensor Cerdas Parkir Mobil Sebagai Sensor Mundur," Jurnal Penelitian Teknik Dan Informatika, vol. 1, pp. 119-127, 2019.
E. S. A. H. Muntaha Nega, "Internet Of Things (IoT) Kontrol Lampu Rumah Menggunakan Nodemcu Dan ESP-12E Berbasis Telegram Chatbot," Jurnal SCRIPT, vol. 7, pp. 88-99, 1 Juni 2019.
Downloads
Published
Issue
Section
License
Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Jurnal Sains Terapan, campus polytechnic country balikpapan, Balikpapan, East Kalimantan as publisher of this journal.
Copyright encompasses exclusive rights to reproduce and deliver the article in all forms and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations. The reproduction of any part of this journal, its storage in databases and its transmission by any forms or media, such as electronic, electrostatic and mechanical copies, photocopies, recordings, magnetic media, etc., will be allowed only with a written permission from Jurnal Sains Terapan, Campus Polytechnic Country Balikpapan, Balikpapan, East Kalimantan.
Jurnal Sains Terapan, campus polytechnic country Balikpapan, Balikpapan, East Kalimantan, Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in Jurnal Sains Terapan are the sole and exclusive responsibility of their respective authors and advertisers.
The Copyright Transfer Agreement Form can be downloaded from this link The copyright form should be filled with respect to article and be signed originally and sent scanned document file (softcopy) and the article to our email, jst@poltekba.ac.id or sent it to the Editorial Office in the form of original hard copy and the article in softcopy form on Flash Disc or Compact Disc, to;
Saiful Ghozi as JST Journal Manager, Pusat Penelitian dan Pengabdian Kepada Masyarakat, Politeknik Negeri Balikpapan, Jl.Soekarno Hatta Km.8, Balikpapan, East Kalimantan.
