Variasi Tegangan Pompa Terhadap Kinerja Mesin Sepeda Motor Honda Scoopy

Authors

  • Arief Muliawan Sekolah Tinggi Teknologi Industri Bontang https://orcid.org/0000-0002-2303-9018
  • Muhammad Derian Alfaraldi Ramadhan Sekolah Tinggi Teknologi Industri Bontang
  • Yano Hurung Anoi Sekolah Tinggi Teknologi Industri Bontang

DOI:

https://doi.org/10.32487/jst.v8i2.1669

Abstract

In this study, the effect of pump voltage on engine performance and fuel consumption on the Honda Scoopy motorbike was investigated. The voltage value is between 5 volts and 7 volts for the fuel pump pump pressure. Based on the results of the influence of variations in the voltage electrical fuel pump on engine performance on Honda Scoopy motorcycles by looking for some data, namely; Voltage supplied to the fuel pump, engine RPM, and fuel consumption. From some of the data above, results with the following values are obtained; The voltage values used are 5.80 V, 6.54 V, 7.34 V, 6.68 V, and 7.10 V. The RPM values obtained are 1200, 2607, 3289, 2802 and 3210. The pressure values at the fuel pump obtained are 20 Psi, 21.5 Psi, 27.5 Psi, 22.5 Psi and 25 Psi with an average fuel consumption value of 12 ml/minute for all variables. The results of the study show that the pressure on the fuel is affected by the voltage which affects the engine rpm. Furthermore, the voltage does not affect the value of fuel consumption on the machine.

Author Biographies

  • Arief Muliawan, Sekolah Tinggi Teknologi Industri Bontang
    Teknik Mesin
  • Muhammad Derian Alfaraldi Ramadhan, Sekolah Tinggi Teknologi Industri Bontang
    Teknik Mesin
  • Yano Hurung Anoi, Sekolah Tinggi Teknologi Industri Bontang
    Teknik Mesin

References

W. W. Pulkrabek, Engineering fundamentals of the internal combustion engine. New Jersey, 2004.

W. Supriyadi and A. Priyo Heru, “Pengaruh Penggunaan Enviropurge KIT Terhadap Performa Mesin Sepeda Motor 4 Langkah,” Jurnal Teknik Mesin, vol. 1, no. 2, pp. 171–176, 2013.

A. Nur and W. B. Santoso, “Analisa Laju Pelepasan Panas Terhadap Perubahan Tekanan Injeksi Bahan Bakar Motor Diesel,” in prosiding Seminar Nasional Teknoin, 2008, pp. 19–24.

I. W. S. Wibawa, I. G. B. W. Kusuma, and I. N. Budiarsa, “Uji Variasi Tekanan Nosel Terhadap Karakteristik Semprotan Bahan Bakar Biodiesel,” Jurnal METTEK, vol. 1, no. 2, pp. 35–44, 2015.

T. C. Bani, E. Sutrisno, and S. Sumiyati, “Studi Pengaruh Jarak Tempuh Dan Umur Mesin Kendaraan Bermotor Roda Empatterhadap Konsentrasi Emisi Karbon Monoksida (CO) Dan Nitrogen Oksida (NOx)(Studi Kasus: Toyota Avanza Berbahan Bakar Premium),” Jurnal Teknik Lingkungan, vol. 2, no. 4, pp. 1–7, 2013.

A. Aryadi, “Kajian Eksperimental Pengaruh Variasi Tekanan Electric Fuel pump Terhadap Daya, Torsi Mesin, Emisi Gas Buang Dan Konsumsi Bahan Bakar Sepeda Motor Injeksi,” Teknobiz: Jurnal Ilmiah Program Studi Magister Teknik Mesin, vol. 10, no. 3, pp. 55–60, 2020.

P. Setyadi and H. Ghany Setyawan, “Pengaruh Kenaikan Tekanan Pompa Bahan Bakar Terhadap Performa Sepeda Motor Honda 125 CC Injeksi Menggunakan Pompa Bahan Bakar Pneumatik,” in Prosiding Semnastek, 2017, pp. 1–6.

I. I. Salim and F. D. Suprianto, “Percobaan Dual Fuel Injection System Pada Motor Bakar Bensin,” Mechanova, vol. 6, pp. 1–4, 2017.

A. Budiprasojo and A. Irawan, “Engine combustion efficiency and performance of exhaust pipe fuel preheating system,” Jurnal Rekayasa Mesin, vol. 9, no. 1, pp. 1–7, 2018.

S. Ghozi, “Penggunaan Aplikasi GeoGebra dalam Pembelajaran dan Penyelesaian Persoalan Statistik,” in Industrial Research Workshop and National Seminar, 2015, pp. 15–22.

J. J. Siang, Riset Operasi dalam Pendekatan Algoritmis. Yogyakarta: ANDI OFFSET, 2011.

Downloads

Published

2023-01-30

Issue

Vol. 8 No. 2 (2022): JST (Jurnal Sains Terapan)

Section

Artikel

License

Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Jurnal Sains Terapan, campus polytechnic country balikpapan, Balikpapan, East Kalimantan as publisher of this journal.

Copyright encompasses exclusive rights to reproduce and deliver the article in all forms and media, including reprints, photographs, microfilms and any other similar reproductions, as well as translations. The reproduction of any part of this journal, its storage in databases and its transmission by any forms or media, such as electronic, electrostatic and mechanical copies, photocopies, recordings, magnetic media, etc., will be allowed only with a written permission from Jurnal Sains Terapan, Campus Polytechnic Country Balikpapan, Balikpapan, East Kalimantan.

Jurnal Sains Terapan, campus polytechnic country Balikpapan, Balikpapan, East Kalimantan, Editorial Board make every effort to ensure that no wrong or misleading data, opinions or statements be published in the journal. In any way, the contents of the articles and advertisements published in Jurnal Sains Terapan are the sole and exclusive responsibility of their respective authors and advertisers.

The Copyright Transfer Agreement Form can be downloaded from this link The copyright form should be filled with respect to article and be signed originally and sent scanned document file (softcopy) and the article to our email, jst@poltekba.ac.id or sent it to the Editorial Office in the form of original hard copy and the article in softcopy form on Flash Disc or Compact Disc, to;

Saiful Ghozi as JST Journal Manager, Pusat Penelitian dan Pengabdian Kepada Masyarakat, Politeknik Negeri Balikpapan, Jl.Soekarno Hatta Km.8, Balikpapan, East Kalimantan.